2.2 TFT Display Module Mounting
We are using your DT022TFT display module in a small enclosure application, and we are trying to keep the overall package size to a minimum. Right now, we have a pcb with roughly the same contour as the module, on which we intend to mount the display, but we need to provide keep out areas in the 4 corners of the board for fasteners for mounting the pcb to the enclosure. Can you provide a mounting provision for the dislay module for an application with these type of constraints? Feel free to ask for any other details in the design that may help us arrive at a solution.
Chris DiSalvatore
727-394-2912
Hi Chris,
In this case design a 3M double sided adhesive is likely the best approach. Between the tape and the case halves clamping together this will hold the display in place. For reference, we use a 3M tape on all of our S64128X modules to adhere the LCD to the backlight.
Hope this helps.
Mike
