ZIF Connectors

Hi Visitor1,
I can send you samples of the FPC connector for the LCD.  Please email me at terry@displaytech-us.com with your address and required number of connectors.  Once you reach production, the connectors can be ordered directly from us in a 1:1 ratio with the LCD.

The FPC for the touch panel is meant to be soldered to your PCB.  There is no connector for this FPC.

Thanks,
Terry

I use the SEA8058-45 connector for the TFT and got the datasheet specs from Mouser, but where is pin 1 on the specs? 

Pin 1 is on the right hand side of the connector and corresponds with the FPC of the SDT032TFT when viewed from the front.  In the image below, pin 1 is on the left hand side.

Thanks,
Terry