How to set the 18bit-RGB interface
Hello,
I would like to use SDT024TFT in my system.
I understand that this product is available with 18bit-RGB interface.
Is it right?
If there is a sample code for setting this interface , please let me know.
Best Regards,
Have you seen the schematic for the 2.4" TFT on our website DESIGN CENTER?
http://www.displaytech-us.com./pdf/Schematic/SDT024TFT-applicationcircuit-080418.pdf
We also have initialization code available.
http://www.displaytech-us.com./pdf/Sample%20Code/SDT024TFT-initializationprogram-080410.txt
Dear terrydtech,
Thank you for your response.
I have already seen this schematic. I understood that this schematic was for 80system interface.
#HSYNC,VSYNC,DOTCLK,ENABLE is not used.
So, I worried about 18-bit RGB interface.
Best regards,
For an 18 bit RGB interface what connections should be made to pins IM0 - IM3
Are the internal registers initialized by the SPI interface (SDO, SDI, and SCL)?
Is this information available from Ilitek for the driver ILI9320 ?
Is there an evaluation or demo board available for the SDT024TFT?
For an 18 bit RGB interface what connections should be made to pins IM0 - IM3
Are the internal registers initialized by the SPI interface (SDO, SDI, and SCL)?
Is this information available from Ilitek for the driver ILI9320 ?
-gmullin
Still waiting for an answer.
What should we do to use 18 bit RGB. I want to drive the TFT with 24FJ256DA210
